Generator 5kva Auto Voltage Regulation “AVR”

    Can be used on electrical appliances containing PC boards (TV’s, Amplifiers etc)
However we do not guarantee such use not to cause damage.

  • For use on light to medium construction sites where electrical power is needed.
  • Normal household sites without power or power interruption.
  • Can be used for functions,parties and family get togethers.
  • Machine can be used to poer up musical equipment ,childrens rides ,jumping castles  etc.

From: R320.00

1st Day Hire Rate
Extra Day
Prices are indicative and subject to change. E&OE Consumables not taken into account, Deposit and transport fees may be required. Please Contact us for an accurate Quote.
SKU: N/A Categories: ,

Instructions and operating tips:

  •    This machine   cannot be used   to power up welding equipment  as they draw too many amps and will burn out the alternator windings in the        generator.
  •    Check trip switch on side of generator if provided  if the machine does not supply  power.
  •    Check engine oil every two hours.
  •    When starting advance the pull start to compression stroke before pulling to start or you will break the pull start.
  •    To avoid engine flooding close petrol tap before switching machine off.
  •    Additional charges  raised if recoil is damaged or lost.



      Machine Description/Features:

  •  This 6KVA single Phase generator is fitted with a 6.5L capacity fuel tank.
  • The unit can deliver 6000 watts of peakpower at a rated 230volts /50Hz.
  • The motor is fitted with an oil alert system that will shut down automatically in event of a low oil reading.
  • This power plant is easily started by use of a manual rope starter.





Content missing

Usage Instructions
  • Always Return All Tools Clean Please.
  • To Avoid Engine Flooding Always Close Petrol Tap When Switching Engine Off. Check Oil Every 2 Hours.
  • Check Trip Switch If The Generator Does Not Deliver Power.
  • No Welders.
  • This Machine Uses Unleaded (Red) Petrol Only.
  • When Starting - Advance The Pull Start To Compression Stroke Before Pulling To Start Or You Will Break The Pull Start. Additional Charge Of R850 Will Be Added To The Invoice
  • Generators Should Be Run In Well-Ventilated Areas.
  • Do Not Overload The Machine Or Increase The Revs On The Machine this alters the Voltage and you will burn out the attached tools