Models We Stock
- Wagner 7000 Petrol
- Titan 440 piston elec.
- Wagner 6500 Diaphragm elec.
- TR5000 Diaphragm elec.
- TR10000 Diaphragm elec. (Can be used to spray eco rubber type products) this machine is slightly more expensive to hire)
These machines are mainly used for Painting applications but are PERFECT for use in sanitizing applications.
They a very effective and can cover up to 700 square meters per hour when doing Sanitizing – (slightly less when painting)
- Adjustable pressure for different types of airless spraying.
- Can be used indoors.
- Lightweight which makes it more comfortable to transport and use..
- Easy to use and clean (it is critical that the machine is rinsed and cleaned directly after use to prevent costly damage)
The correct attitude of the spray fan is always to maintain the fan angle at right angles to the
plane of work. Any deflection, either horizontally or vertically produces at one side a thinner
application, but loads the other side with an over thickness, both unsightly and likely to run.
The correct technique is with the gun at right angles and always parallel to the work face with
the gun travelling at the speed that the spray fan slightly under-covers the surface. The return
spray, also parallel, overlays by 50% thus, stroke by stroke, attaining full attractive coverage
of the surface.
This sounds complex but is actually easy to do. However, it is not easy to correct those
operators that persist spraying with a loose ‘wristy’ action. Short of breaking their arm and
applying a plaster cast, this remains a difficult habit to correct. Left handed people rarely
have this problem, possibly because they are already living in a largely right handed world
and are more receptive to adaptation.
Airless pumps have a fluid pressure adjustment and the ideal situation is to have selected the
best tip for the material being sprayed and adjusted the pressure to properly atomise the spray
flow. Because the spray tip opening is elliptical, too little pressure prevents full atomisation
and a spray pattern is produced with tails. The pressure should increase until the fan forms
without any tails and thereafter increased by another 10%.
This represents ideal conditions and allows for line pressure drops, changes from climbing
scaffolds and some latitude for viscosity changes mix to mix. The critical statement –
‘atomise’ – the lowest pressure necessary to atomise the material.
HOW TO CLEAN VIDEO – Very important to watch !
Water based sanitizer- use water to clean the machine.
Solvent based sanitizer- require 20 Litres of solvent to clean the machine and then rinse the machine with water and sunlight Liquid.
If you are using a solvent based sanitizer you need to bring the your 20 Litres of solvent cleaner with before we issue the machine to make sure that you will be able to clean the machine properly. Unfortunately we need to be extremely cautious when it comes to ensuring that the correct cleaning procedure is followed immediately after use to avoid high cost repairs. The machine cannot be cleaned after the sanitizer dries.