Prime intake/yellow pipe before starting. You must fill the suction hose with water for the pump to prime or it will not pump. The suction hose needs to be filled with water before starting. If the suction hose is not attached properly the pump won't work. Neveruse to pump any debris, sand or stone. Cannot pumpfrom deep water wells. 600l per minute to avoid engine flooding always close petrol tap when switching engine off. Check oil every 2 hours, it uses oil 15 w 40. When starting - advance the pull start to compression stroke before pulling to start or you will break the pull start or your hand. Never allow it to run dry it will cause mechanical seal failure R480. 00, never allow unskilled personnel to operate machine. Be extremely careful not to puncture the outlet / lay-flat hose. R89/meter. Don't let vehicles drive over the pipe. We are very strict on holes in the outlet pipe. The holes can not be repaired.

- If we deliver you must phone for collection please - we do not automatically collect.
- Machines are not insured, if not returned you will need to pay for the full replacement.
- Make sure you know how to use the tools. Ask if you need help, our friendly staff will assist. Also, make sure of safety requirements.
- Hires are charged for time out – not time used. Minimum 1 day (1 day = 24 hrs)
- Scaffold is charged weekly, all other tools daily.
- Tools must be returned Clean please. e.g., if you paint onto a ladder, we charge for cleaning.
- Negligent damages get charged separately.
- Consumables not used, may be returned for refund.
- Only use heavy-duty extension leads, not thin household leads.
- If you pay by cash we can refund in cash, if you pay by card we refund onto the card. (we can't refund onto debit cards) - Card refunds can take up to 10 days.
- Weekend hire starts after 2 pm Friday until 9 am Monday = 1day charge. ( Sundays are free) If you are late on Monday it is for 2 days.
- If you keep machines for a long time we can give you a better rate, discuss with your hire controller in store.

Specifications
Engine GX120
Displacement 118cc
Bore and stroke 2.4" x 1.7"
Discharge Capacity 600 L/Min
Total Head 1.5m 
Suction Head 2.5m
Priming time 110 sec @ 16.4 ft.
Drive system Direct
Discharge capacity 164 gal/min
Maximum pressure 45 psi
Dimensions (LxWxH) 19.3" x 14.4" x 16.5"
Run Time @ Max Discharge 1.7 hr