Explore Our Tools
Concrete Mixer
Concrete Mixer
Model:Â Ian Dickie BM 175
- Chain and sprocket tilting mechanism
- Sturdy taper roller drum bearings
- Replaceable mixing tools
- Large drum mouth for loading and tilting shaft
- Lift eye yoke
- Bolt on ring gear
- Foot tilt drum lock/release
- Easy to remove drum
- Ventilated canopy
Always ensureyou have sufficient wheelbarrow, spades, scaffold boardswooden 3 metres. Always return all tools clean please. This machine uses unleaded (green) petrol only. To avoid engine flooding always close petrol tap when switching engine off. When starting - advance the pull start to compression stroke before pulling to start or you will break the pull start. Additional charge will be added to the invoice if recoils are damaged. Check oil every 2 hours. Never, never to be used for tar or asphalt mixing. Cleaning charges will apply. Please instruct your operator to clean mixer when done, if not charges are applicable. Hose mixer down every 20 min during use, charge raised if returned dirty inside or out. Please use clean container when refueling. Reco mm ended mix:15 stone 10 sand 5 cement (shovels). Add water, then cement, then stone, then sand to prevent sticking to drum. Nb!!! never hit drum to loosen cement use water and rinse drum straight after use. R2000 charge if you hit the mixer drum. (we can’t un-hit the drum) don't place any other objects than sand, stone, water and cement in the drum. Never, never to be used for tar or asphalt mixing. No tar!!!! 1 delivery within 10 meters of our delivery vehicle. To avoid engine flooding always close petrol tap when switching engine off. When starting - advance the pull start to compression stroke before pulling to start or you will break the pull startadditional charge of R850 will be added to the invoice if this happens. Donot overload machineasit adds stresses to the belts on the pulleyand can cause the bearings to collapse. Alwaysmixand fill drum to75% capacityto avoid overloading as it will mix easier.
- If we deliver you must phone for collection please - we do not automatically collect.
- Machines are not insured, if not returned you will need to pay for the full replacement.
- Make sure you know how to use the tools. Ask if you need help, our friendly staff will assist. Also, make sure of safety requirements.
- Hires are charged for time out – not time used. Minimum 1 day (1 day = 24 hrs)
- Scaffold is charged weekly, all other tools daily.
- Tools must be returned Clean please. e.g., if you paint onto a ladder, we charge for cleaning.
- Negligent damages get charged separately.
- Consumables not used, may be returned for refund.
- Only use heavy-duty extension leads, not thin household leads.
- If you pay by cash we can refund in cash, if you pay by card we refund onto the card. (we can't refund onto debit cards) - Card refunds can take up to 10 days.
- Weekend hire starts after 2 pm Friday until 9 am Monday = 1day charge. ( Sundays are free) If you are late on Monday it is for 2 days.
- If you keep machines for a long time we can give you a better rate, discuss with your hire controller in store.
- Machines are not insured, if not returned you will need to pay for the full replacement.
- Make sure you know how to use the tools. Ask if you need help, our friendly staff will assist. Also, make sure of safety requirements.
- Hires are charged for time out – not time used. Minimum 1 day (1 day = 24 hrs)
- Scaffold is charged weekly, all other tools daily.
- Tools must be returned Clean please. e.g., if you paint onto a ladder, we charge for cleaning.
- Negligent damages get charged separately.
- Consumables not used, may be returned for refund.
- Only use heavy-duty extension leads, not thin household leads.
- If you pay by cash we can refund in cash, if you pay by card we refund onto the card. (we can't refund onto debit cards) - Card refunds can take up to 10 days.
- Weekend hire starts after 2 pm Friday until 9 am Monday = 1day charge. ( Sundays are free) If you are late on Monday it is for 2 days.
- If you keep machines for a long time we can give you a better rate, discuss with your hire controller in store.
Specifications
Type Side Tilting
Capacity Unmixed – 250 litres / Mixed – 175 litres
Drum Speed 22 – 26 rpm
Mix Cycle 3 minutes
Discharge Height 550mm
Loading Height 1390mm
Dimensions (LxWxH) 1820x1000x16200mm
Track Width 800mm Standard – 1450mm Tow Mode
Mass (without engine) 295kg
Type Side Tilting
Capacity Unmixed – 250 litres / Mixed – 175 litres
Drum Speed 22 – 26 rpm
Mix Cycle 3 minutes
Discharge Height 550mm
Loading Height 1390mm
Dimensions (LxWxH) 1820x1000x16200mm
Track Width 800mm Standard – 1450mm Tow Mode
Mass (without engine) 295kg
Enquire Below
"*" indicates required fields
More Information
Featured Products
Not only do we pride ourselves in strong business ethics and loyalty, we strive to be the most convenient with three strategically located branches enabling us to deliver anywhere in Cape Town.
Categories
Navigate
© Hire Our Tools. Affordable, Reliable & Convenient Tool Hire.
Website design & development by Kri8it Digital